2/28/2023 0 Comments Pemsa cable ladder![]() ![]() This coating maintains the electrical continuity of rejiband®, complying with the requirements of BS EN 61537 standard for cable tray system with electrical continuity characteristics. Black colour provides excellent aesthetics which are suitable for decorative applications, commercial facilities, false ceilings, etc.No irregularities or areas with reduced thickness.The smooth finish is much more aesthetic than that of hot dip galvanised. Hot dip galvanised normally ranges from between 45 to 70 microns mean coating thickness, so it should be Class 5, 6, or 7, having a lower corrosion resistance than BLACK C8. Rejiband® BLACK C8 has obtained the AENOR N Marking (Spanish Association for Standardization and Certification) and the certification IECEE CB Scheme of IEC (International Electrotechnical Commission), garanting the Class C8 of resistance against corrosion, with more than 1000 hours on the Salt Spray Test. Where necessary, cable tray systems and cable ladder systems may be used for the division or arrangement of cables into groups.ĭuration (h) Salt Spray Chamber Chamber Test – acc. This International Standard specifies requirements and tests for cable tray systems and cable ladder systems intended for the support and accommodation of cables and possibly other electrical equipment in electrical and/or communication systems installations. With the result obtained in the neutral salt spray test, more than 850 hours, the corrosion resistance is classified as Class 8, according to Table 9 of the current standard BS EN 61537 trays. High Corrosion Resistanceĭemonstrated with more than 1000 hours in the neutral salt spray tests and obtained through a new manufacturing process that improves both the barrier effect against the aggressive media and the ability of self healing in damaged areas. We have a CE certificate in compliance with the low voltage directive 2014/35 / EU and the approval of London Underground for railway installations, tunnels and underground infrastructures.Pemsa has developed a high resistance coating for rejiband® wire mesh tray which provides an excellent resistance to corrosion in wet and aggressive environments. Megaband® PG has been developed, like all of our products, according to tests and approvals in our laboratories according to the parameters of the international standard of trays IEC61537 and has complied with all of the requirements. Wide range of accessories, 90º and 45º bends, crossovers, Tees, level changes, etc., which all have the same technical characteristics as the straight ladder section, integrated couplers, corrosion resistance, etc.It facilitates the click connection of the straight cover without the need for any fixings. Safety edge thanks to the rounded profile of the side rail.Alternate rungs increase cable fixing options.High quality Pre-galvanised finish, achieving Class 3 corrosion resistance.High load capacity with a range of 190 to 250 kgs at a distance of 2 metres between supports.No couplers are required, just the appropriate M8 nuts and bolts. Reinforced clinching system for the connection of the rung and the siderail.The rungs are mounted alternately up and down to allow the fixing of the cables.The ladder rungs are mounted alternately up and down to allow the fixing of the cables and it is available in heights of 60, 85, 100, 120 and 150 mm and widths from 100 to 1000 mm. Its highlighted features are the easy assembly using the click system for quick connection between lengths and accessories, and the guaranteed maximum load capacity. Pemsa launches its new product, Megaband® PG Pre-galvanised. The main feature of Megaband® pre-galvanised is its reinforced clinching system for the connection of the ladder rung and the siderail. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |